How To Apply Small Decals And Transfer Based Stickers

Step 1

Clean the area you intend to apply the decal with rubbing alcohol or soapy water. Do not use window cleaner or similar products as they may leave residues behind. After you have thoroughly cleaned the area allow the surface to be 100% dry.

Step 2

Prepare your decal for application by firmly rubbing a squeegee or credit card over the opaque transfer tape. This removes any air bubbles that may have formed and it makes the sticker cling to the transfer tape better.

Step 3

Peel the paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat the previous step.

Step 4

Slowly place the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results it is suggested to wait 24 hours before moving to the next step.

Step 5

Slowly peel the opaque transfer tape off at an angle. Be very careful so you do not pull your decal off the applied surface. If the sticker begins to pull away repeat the previous step to secure your decal to the transfer film.

If you need further help please us this link to contact us

How To Apply Decals |  About | Privacy Policy | Terms Of Service | Shipping | Sitemap

Official PayPal Seal